Print Page - Esslinger Cam??

Title: Esslinger Cam??
Post by: fast34 on February 02, 2006, 01:53:35 PM

I have a 2.3 cam I acquired many years ago, but I am not sure what it is. I believe it to be an Esslinger solid. I contacted them about it, and they say it is probably one of theirs, but they have no info. on it because of it's age. Does any one have an old Esslinger catalog, say 10 years old. The part number on it is E 6677. If some one has this info. it would be greatly appreciated.

Title: Re: Esslinger Cam??
Post by: turbopinto72 on February 02, 2006, 02:02:35 PM

I will take a look tonight.

Title: Re: Esslinger Cam??
Post by: fast34 on February 02, 2006, 02:22:05 PM

THANKS!! Will appriciate that.

Title: Re: Esslinger Cam??
Post by: turbopinto72 on February 02, 2006, 08:21:28 PM

Well, I don't have any Esslinger Catalogs that go that far back. I tried to cross reference it to a Crower cam and didn't have any luck with that either.

Title: Re: Esslinger Cam??
Post by: fast34 on February 03, 2006, 01:05:10 PM

Thanks for trying!~

Title: Re: Esslinger Cam??
Post by: turbopinto72 on February 14, 2006, 09:51:13 PM

Hey, I was just thinking, Are you sure that cam is not a 2277?

Title: Re: Esslinger Cam??
Post by: turbopinto72 on February 14, 2006, 10:03:58 PM

If it is a 2277 cam then the spec's would be : Lift 489/443, Dur @0.050 241/219 with a 111.3 lobe seperation. This is a good turbo cam.

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: fast34 on February 02, 2006, 01:53:35 PM