Print Page - 74 Pinto 5 lug

Title: 74 Pinto 5 lug
Post by: svodave on November 07, 2003, 09:10:11 AM

I have a '74 Pinto with an 8" rear w/ 5 lug axles but the front are still 4 lug. At my local junkyard I found a '74 Maverick with 5 lug all around. Would the front 5 lug Maverick stuff fit the Pinto? Sounds dumb I know, but a '74 anything is hard to find down here in Houston. Thanks! Dave

Title: Re:74 Pinto 5 lug
Post by: alkypinto on November 22, 2003, 11:31:24 AM

Hi Dave,

No, the Maverick spindles are different then a
Pinto and the stuff is not interchangeble. You
can however buy 5 lug rotors for the Pinto
thru Speedway NE to convert it.

Rich

Title: Re:74 Pinto 5 lug
Post by: 72 sedan on November 23, 2003, 06:05:53 PM

Try JEG'S as well

Title: Re: 74 Pinto 5 lug
Post by: hoots on March 06, 2005, 08:33:20 PM

Is the 8" rearend original? I need 5 lug axles for my 8" from a MustangII, not sure which axles/drums would be a direct fit. Any help would be appreciated.

Title: Re: 74 Pinto 5 lug
Post by: 79bobcat on March 20, 2005, 09:50:01 PM

you can try ebay there is some five lug front rotor's for a pinto spindle there.

Pinto Car Club of America

Shiny is Good! => General Pinto Talk => Topic started by: svodave on November 07, 2003, 09:10:11 AM