Pinto Car Club of America
Shiny is Good! => Your Project => Topic started by: pegasus2050 on October 01, 2005, 09:25:19 AM
we have taken the pinto to our local emissions testing station and passed with flying
colors after a little detuning. funny some of the personnel didn't even know what
kind of car it was.nor did they notice that you have to open the hatch to put fuel
in the car. also put 2" lowering kit in the rear, car rode like crap. guess it extended
the shocks out to much so i installed 2" shock extensions and improved to ride a
100%.went to a local mall about 20 miles away that has a car show every Friday night but could not cruise very much as the car temp got up to about 230. i have
got to work on a better cooling system for this car. sure got a lot of looks at the car
show and made me realize all the work and money we have invested in this car was
well worth it. this winter we are going to rebuild the front end and try to come up
with a better cooling system and redo the exhaust system. any ideas would be
welcomed.
What is your configuration? Take some pictures. Let's see what you have.
1976 pinto runabout, 302 bored 40 over, flat top pistons, 289 ported and polished
heads, 3000 stall converter, c4 transmission, 9" rear end. msd ignition box and
distributor. radiator has a 17x26 core and a 16'' pusher fan. 289 exhaust manifolds,
single cat. converter and no mufflers. pictures posted under "your pinto" under
1976 street toy posted back in july.