Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Jdm071755 on August 19, 2017, 09:56:53 PM
What model and year mustang has parts that will fit the pinto
Sent from my iPhone using Tapatalk
Quote from: Jdm071755 on August 19, 2017, 09:56:53 PM
What model and year mustang has parts that will fit the pinto
Sent from my iPhone using Tapatalk
1974-1978 mustang ii will
Sent from my iPhone using Tapatalk
Quote from: Craiggarrett1969 on August 20, 2017, 05:17:15 AM
1974-1978 mustang ii will
Sent from my iPhone using Tapatalk
Thanks
Sent from my iPhone using Tapatalk
Quote from: Jdm071755 on August 20, 2017, 07:24:49 AM
Thanks
Sent from my iPhone using Tapatalk
I just got a few parts for my 1979 pinto from a 1978 mustang .center column , shifter rubber ( auto) door strikers too
Sent from my iPhone using Tapatalk
As stated 74-78 Mustang II's. BUT..., 71-73 Pinto's have some aspects that are different - especially in the front suspension. For all that a Pinto looked the same (less the front grill area) there were a significant number of changes over the years. The most interesting I've found is the supposed four different pedal configurations . The best donor part is a 8" rear.
The tranie should interchange also. If the car is going to be used for racing, the Mustang II front springs will work after they are cut down. The seats are a bolt in mod too. I'm sure there is other items too.