Print Page - Port hole windows

Title: Port hole windows
Post by: Jdm071755 on August 19, 2017, 03:00:02 PM

I'm pretty sure these rings just pull out but I want to make sure. Since parts are so hard and expensive I just want to check.

Sent from my iPhone using Tapatalk

Title: Re: Port hole windows
Post by: Jdm071755 on August 20, 2017, 04:55:28 PM

Ok so I may be wrong I tried taking off the inside bezel by just pulling on it. It's not budging Do I have to take the whole thing apart?

Sent from my iPhone using Tapatalk

Title: Re: Port hole windows
Post by: Pintopower on August 21, 2017, 02:51:39 PM

Hmmm, mine just pull out. I suspect that either they have been in there a million years and are stuck or someone siliconed them? are you able to use a denstist's tool to pry the rubber away from the trim ring a little bit?

Title: Re: Port hole windows
Post by: Jdm071755 on August 21, 2017, 04:02:00 PM

Good idea I will give it a try. I am just a little cautious because parts are so hard to find. Thanks so much

Sent from my iPhone using Tapatalk

Title: Re: Port hole windows
Post by: Jdm071755 on August 24, 2017, 01:04:50 PM

Quote from: Pintopower on August 21, 2017, 02:51:39 PM
Hmmm, mine just pull out. I suspect that either they have been in there a million years and are stuck or someone siliconed them? are you able to use a denstist's tool to pry the rubber away from the trim ring a little bit?

Thanks
What I did was put Dawn and water in a spry bottle. The sprayed the rubber seal and they came right out.

Sent from my iPhone using Tapatalk

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Jdm071755 on August 19, 2017, 03:00:02 PM