Print Page - 1979 clutch fork boot

Title: 1979 clutch fork boot
Post by: bverboy on March 17, 2017, 06:07:53 AM

looking for one used or new or something compatible

Title: Re: 1979 clutch fork boot
Post by: dick1172762 on March 17, 2017, 08:36:07 AM

See parts resources forum.

Title: Re: 1979 clutch fork boot
Post by: warhead2 on March 17, 2017, 05:23:58 PM

Here is a pic from my 77 Ford shop manual. Part num 7513(https://uploads.tapatalk-cdn.com/20170317/cd30ee12c062e5dcf80c5ea3b69fc26c.jpg)

Sent from my SAMSUNG-SM-G930A using Tapatalk

Title: Re: 1979 clutch fork boot
Post by: warhead2 on March 17, 2017, 05:39:19 PM

Just found this on ebay looks like whats in the manual with a little different part number.
(https://uploads.tapatalk-cdn.com/20170317/07b40259cf13513979ff2c3f08d7c41b.jpg)

Sent from my SAMSUNG-SM-G930A using Tapatalk

Title: Re: 1979 clutch fork boot
Post by: bverboy on March 17, 2017, 05:51:15 PM

thanks warhead ;)

Title: Re: 1979 clutch fork boot
Post by: Pintosopher on March 17, 2017, 07:19:50 PM

Quote from: warhead2 on March 17, 2017, 05:39:19 PM
Just found this on ebay looks like whats in the manual with a little different part number.
(https://uploads.tapatalk-cdn.com/20170317/07b40259cf13513979ff2c3f08d7c41b.jpg)

Sent from my SAMSUNG-SM-G930A using Tapatalk

Thanks for your diligent research, another possibly near unobtanium part that still exists where the English crown keeps the fires of hope alive for restoration. At that price (with currency exchange) it's beginning to rival Mk1 VW Rabbit shifter linkage boot prices as the Possibility of repop parts to drop as 3D printing makes Mold fabrication a bunch cheaper. It's a whole new world... ;)

Pintosopher, Not all that obsolete, but keeping the belief of longevity alive ;)

Title: Re: 1979 clutch fork boot
Post by: warhead2 on March 17, 2017, 07:26:22 PM

Thanks. I also see 3D printing helping bringing back some hard to find parts back at a cheap price

Sent from my SAMSUNG-SM-G930A using Tapatalk

Title: Re: 1979 clutch fork boot
Post by: bverboy on March 19, 2017, 06:06:57 PM

I hope so

Title: Re: 1979 clutch fork boot
Post by: bverboy on March 25, 2017, 05:32:54 PM

my bell housing hole is like 2 3/8" x 4" if that helps

Title: Re: 1979 clutch fork boot
Post by: hydrodriver on May 01, 2017, 09:19:06 PM

IS this it? Its not rubber - hard plastic. D98C-7513-CA part number. Trying to attach the photo - it is about 2 1/4 wide by 5 ", fastens with one screw.

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => Parts Resources, Here is where you can find this or that. => Topic started by: bverboy on March 17, 2017, 06:07:53 AM