Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: robertbrann18 on January 14, 2017, 07:23:58 AM

Title: 1974 Ford Pinto Ranger Header Swap
Post by: robertbrann18 on January 14, 2017, 07:23:58 AM
I'm about to go to the junkyard to pull a 92-93 Ranger header. Will it be a direct bolt on for my 1974 Ford Pinto or will it take some modification?
Title: Re: 1974 Ford Pinto Ranger Header Swap
Post by: dick1172762 on January 14, 2017, 08:43:56 AM
YES! No mod needed.
Title: Re: 1974 Ford Pinto Ranger Header Swap
Post by: robertbrann18 on January 14, 2017, 08:46:17 AM
Quote from: dick1172762 on January 14, 2017, 08:43:56 AM
YES! No mod needed.

Thanks!!!!!!!!


Sent from my iPhone using Tapatalk
Title: Re: 1974 Ford Pinto Ranger Header Swap
Post by: dick1172762 on January 14, 2017, 08:51:12 AM
Make sure you get all the hardware/bolts/exhaust pipe/etc/etc.
Title: Re: 1974 Ford Pinto Ranger Header Swap
Post by: fh4ever on January 23, 2017, 06:39:04 AM
I had to plug the small holes in the head just below the ports on my '74.  The header did not cover them completely.  I also made a cap to put on the egr port to block it off (on the ranger header).  The Pinto exhaust pipe flange "collar" even fit the ranger header. 
http://www.fordpinto.com/general-help/ranger-header-on-74-2-3/msg163977/#msg163977
Text only | Text with Images