Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: JoeBob on September 29, 2015, 11:36:33 PM
What causes the mirror to move wrong? All cables are connected.
it may have been removed before , the part that controls the mirror might be 180 degrees out, it has a flat spot on each side , unscrew the nut and turn it a half turn and try again
Quote from: pinto_one on September 30, 2015, 08:43:01 AM
it may have been removed before , the part that controls the mirror might be 180 degrees out, it has a flat spot on each side , unscrew the nut and turn it a half turn and try again
That was simple yet ingenious :) I can't wait to see the answer!