Pinto Car Club of America

I need a turbo header that moves it ford so I don't have too take out blower motor any help please

How much room you need , the last one I done years ago I angle mill the exhaust manifold to move it enough to clear the air conditioning expansion valve, it was a close fit , at the time I had a bridge port and milled 3/4 inch in the front and 1  1/4 in the back , it moved the rear exhaust outlet inside towards the engine 1 1/2 inches just enough to clear , but this was on a 77 pinto  , you may have to install the manifold and set the turbo on the top and eye ball how much you may have too machine off to clear , just an idea , it work on my 77 ,

There are a few blower motors you can get to replace that one, that are shorter. Mine is a 76, but I have about a heavy half inch of clearance with the stock manifold and a $50 fan motor. Check out the turbo swap threads. A few choices in there.