Text only | Text with Images

Pinto Car Club of America

Shiny is Good! => Your Project => Topic started by: Trucker Tim on November 06, 2014, 09:47:09 PM

Title: Need To Drain My Block!
Post by: Trucker Tim on November 06, 2014, 09:47:09 PM
Hey Crew.
  Holy-Cow, it's been a while since I've been on here and boy is this ever different! Almost too much for an old trucker to navigate.
   I need to completely drain and flush the block on my "Pinto" motor in my little 48 Willys Jeep project.  I don't trust simply draining the radiator.  Is there a certain or specified drain plug on the block somewhere??   :-\
  Thanks Guys!
Title: Re: Need To Drain My Block!
Post by: 74 PintoWagon on November 07, 2014, 06:57:56 AM
There's a pipe plug  behind the exhaust manifold towards the back, it's pretty easy to get at..
Title: Re: Need To Drain My Block!
Post by: Trucker Tim on November 07, 2014, 07:01:41 AM
Hey Art!
  Your timing is excellent my Friend. Just getting ready to head out to the shop! I'll look for the pipe-plug you speak of! Thank you. 
Title: Re: Need To Drain My Block!
Post by: 74 PintoWagon on November 07, 2014, 07:12:46 AM
Quote from: Trucker Tim on November 07, 2014, 07:01:41 AM
Hey Art!
  Your timing is excellent my Friend. Just getting ready to head out to the shop! I'll look for the pipe-plug you speak of! Thank you. 
Anytime bud, glad to help.
Text only | Text with Images