Print Page - V6 camshaft end play help

Title: V6 camshaft end play help
Post by: spyville on July 24, 2014, 02:24:55 PM

I am re building my V6 and installed the camshaft yesterday. The book says end play should be about .006 I have close to double that. The camshaft is new and the bearings are new.

any ideas on what could cause this?

Thanks

Title: Re: V6 camshaft end play help
Post by: amc49 on July 24, 2014, 11:15:02 PM

Wear in the cam setting plate. Or new cam out of spec.

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: spyville on July 24, 2014, 02:24:55 PM