Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: racinmud on July 24, 2014, 01:38:34 PM

Title: Running round belt on square tooth pulley?
Post by: racinmud on July 24, 2014, 01:38:34 PM
Does it work?  On my son's mini stock pinto, have to use "stock appearing" cam pulley.  Got the "stock" one from Speedway, head is milled 115 thousands,  square belt seems to jump a tooth. 

Thanks,
Leon
Title: Re: Running round belt on square tooth pulley?
Post by: 65ShelbyClone on July 24, 2014, 04:27:27 PM
You have to use the right belt for the tooth profile.
Title: Re: Running round belt on square tooth pulley?
Post by: racinmud on July 24, 2014, 04:54:21 PM
OK, Thanks!
Leon
Title: Re: Running round belt on square tooth pulley?
Post by: amc49 on July 24, 2014, 11:11:11 PM
DON'T do it............

The belt should not jump at all unless sprocket is heavy worn. Don't ever rotate engine backwards, it jumps that way.

If belt exposed to dirty air the sprocket WILL smooth all edges from friction wear to try to jump, I had one do it after running no belt cover on a stock streeter that ran that way for 2-3 years.
Text only | Text with Images