http://www.ebay.com/itm/Ford-Mustang-Pinto-2-3-Liter-Aluminum-Race-Crank-Pulley-/281003778766?pt=Motors_Car_Truck_Parts_Accessories&hash=item416d2162ce&vxp=mtr
Those are on ebay and for the life of me I can't find one for a 2.0. Would that fit, maybe with some machining or something even?
Hi Dianne,
Esslinger engineeering has them. They have a lot of 2.0/2.3 performance parts.
Dennis
Careful those are for racing they're made for slowing down the alternator and water pump at high R's, I'd find out how much it slows them down might be to slow for the street??..
Quote from: 74 PintoWagon on November 04, 2013, 09:33:37 PM
Careful those are for racing they're made for slowing down the alternator and water pump at high R's, I'd find out how much it slows them down might be to slow for the street??..
How do I find out?
Quote from: dianne on November 05, 2013, 06:49:09 AM
How do I find out?
They're only 4" diameter what size is the factory one?, haven't messed with too many small blocks so I don't remember. BTW, why would you want one of those to begin with??..
Quote from: 74 PintoWagon on November 05, 2013, 07:07:42 AM
They're only 4" diameter what size is the factory one?, haven't messed with too many small blocks so I don't remember. BTW, why would you want one of those to begin with??..
I have a 2.0 in my Pinto. Remember, it's my daily driver so no big block in it LOL The one on the car is bent some, so vibrating and everything. I have to replace it. Finding the part is like looking for a needle in a haystack!
Then just get another stock one be way better off, Fred probably has a few laying around.
Quote from: 74 PintoWagon on November 05, 2013, 07:23:31 AM
Then just get another stock one be way better off, Fred probably has a few laying around.
Not with the dual. This car had air conditioning and need to get it back in. But I need the pulley with 2 grooves.
Quote from: dianne on November 05, 2013, 07:32:11 AM
Not with the dual. This car had air conditioning and need to get it back in. But I need the pulley with 2 grooves.
He has a lot of stuff wouldn't hurt to ask.
Quote from: 74 PintoWagon on November 05, 2013, 07:43:50 AM
He has a lot of stuff wouldn't hurt to ask.
I already did, he's looking. He had one for the single pulley...
Quote from: dianne on November 05, 2013, 07:47:04 AM
I already did, he's looking. He had one for the single pulley...
Oh ok, I'm sure there's some around, I'd stay away from the race stuff though you don't need it.
Quote from: 74 PintoWagon on November 05, 2013, 07:53:15 AM
Oh ok, I'm sure there's some around, I'd stay away from the race stuff though you don't need it.
Point me in the right direction? LOL
I'm trying to look this up in the Ford parts book for you. Need to know if it's 'factory' a/c -- 'Dealer' built-in -- or 'hang' on style.
Quote from: Ricpinto on November 05, 2013, 07:59:39 AM
I'm trying to look this up in the Ford parts book for you. Need to know if it's 'factory' a/c -- 'Dealer' built-in -- or 'hang' on style.
I looks like it was factory inside. I'll ask Dave, he's stopping by today!
I want to change mine cause it wobbled when I got it...and it's getting worse. (They totally don't just pop right off, Chilton!!!) lol I'm in the same boat.
2.3 crank is larger diameter then a 2.0 . Fred :)
Quote from: Fred Morgan on November 06, 2013, 07:40:45 PM
2.3 crank is larger diameter then a 2.0 . Fred :)
I do know they don't swap...and there are many 2.0 variants. It can get confusing, especially if you run across something on Ebay that is listed only as 2.0. Always send messages and ask questions. lol
Quote from: jeremysdad on November 06, 2013, 07:44:05 PM
I do know they don't swap...and there are many 2.0 variants. It can get confusing, especially if you run across something on Ebay that is listed only as 2.0. Always send messages and ask questions. lol
Yeah, one was there and it was the wrong one. I do that with all parts and thanks for the help! One someone here sent me a picture of looked cast iron and something like a clothes line pulley.
If anyone knows of a crank pulley for a 2.0 around or have one, please let me know as I need one desperately!
You can take a single groove and weld another on for A/C, I have done that before. Fred :)
Quote from: Fred Morgan on November 06, 2013, 07:53:56 PM
You can take a single groove and weld another on for A/C, I have done that before. Fred :)
I'm not a welder and don't know anyone who would do that small part. I'll keep plugging and looking!
I have the 2 groove crank and water pump pulleys. Also have the compressor brackets and 4 blade fan. All came off '72 2000cc. Where are you located?
Quote from: 72pair on November 07, 2013, 01:08:57 PM
I have the 2 groove crank and water pump pulleys. Also have the compressor brackets and 4 blade fan. All came off '72 2000cc. Where are you located?
I'm in Nampa, ID 83651 :D