Hello all, I'm trying to remove my steering wheel but it looks like I need a puller to remove it? I got off the horn, unscrewed the three screws and undid the large nut on there, but no dice in getting it off so I'm assuming I need a puller. Just asking as I didn't need one when working on my 66 Mustang, it just came right off.
I've got some off by wiggling but some needed a puller.
i press up agianst the wheel with my knees and give the center stud a whack with a big hammer ..
Thanks for the replies, I do believe I have a rubber mallet here, might try that first, otherwise I will probably just get a puller from the store.
A cheap puller is under 10 bucks. It's worth it to have it in your toolbox. Mine's 20 years old & has pulled dozens of wheels. This wont be the only time you need it.
last time I needed one I got it on loan from Checker auto parts no charge
Pullers are cheap or just make one, when you come across a wheel that's real tight you'll be glad you have one.
got mine from O'Riely's for around $12.00. It's all steel too.
Ended up buying a puller - had to look online to figure out how to use it, but I got the wheel off!