Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: rramjet on June 25, 2013, 08:20:15 PM

Title: New gauges
Post by: rramjet on June 25, 2013, 08:20:15 PM
I put a set of direct reading Oil Pressure and Water Temp gauges in my newly acquired 73 Squire today. Can't stand idiot lights. Need to know what's happening. I was pleasantly surprised to see 60 pounds of oil pressure and water temp never over 190 degrees.

Does this sound typical?
Title: Re: New gauges
Post by: Jerry merrill on June 25, 2013, 08:26:41 PM
My 71 with a 2.3 runs about 175 or so with a 160deg thermostat and about 45 psi oil when warmed up at idle.
Title: Re: New gauges
Post by: rramjet on June 25, 2013, 08:46:33 PM
Thanks. So sounds like reasonable numbers. Forgot to mention, mine is a 2000 with 95K on the Odo.
Title: Re: New gauges
Post by: Pinto5.0 on June 25, 2013, 10:14:12 PM
Nothing wrong with those numbers at all.
Title: Re: New gauges
Post by: 74 PintoWagon on June 25, 2013, 10:31:54 PM
Sounds all good to me..
Title: Re: New gauges
Post by: tbucketjack on June 26, 2013, 04:49:47 PM
All sounds good to me.
Text only | Text with Images