Print Page - 2.0 head cam

Title: 2.0 head cam
Post by: 74turbowagon on May 23, 2013, 11:08:57 AM

Hi I have a question about swapping out a stock 2.0 cam for a 2.5 roller cam And lifters is it a possible swap thanks

Title: Re: 2.0 head cam
Post by: turbopinto72 on May 23, 2013, 11:22:00 AM

Whats the question ?

Title: Re: 2.0 head cam
Post by: turbopinto72 on May 23, 2013, 12:31:47 PM

BTW, A 2.5 roller cam wont fit a 2.0 head.

Title: 2.0 head cam
Post by: 74turbowagon on May 24, 2013, 09:53:38 AM

That was my question thanks

Title: Re: 2.0 head cam
Post by: thmpsn70 on July 05, 2013, 09:32:01 PM

if the 2.5 roller followers are stamped they won't fit the majority of the 2.3's in pintos either, the valve stem slot is skinnier due to those valves being thinner

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => Pinto FAQ => Topic started by: 74turbowagon on May 23, 2013, 11:08:57 AM