Print Page - 2.3 Pilot hole ID in crankshaft for a torque converter

Title: 2.3 Pilot hole ID in crankshaft for a torque converter
Post by: dennisofaz on January 30, 2013, 09:19:22 PM

Hi Everyone,

Does anyone know the diameter of the crankshaft torque converter pilot hole is on a 2.3 liter? I am putting together the parts to change my C-3 trans for a C-4. Thanks in advance for the help.

Best regards,

Dennis

Title: Re: 2.3 Pilot hole ID in crankshaft for a torque converter
Post by: TIGGER on January 31, 2013, 02:31:16 AM

As far as I know as long as there is no pilot bearing installed in the crankshaft either torque converter should fit.

Title: Re: 2.3 Pilot hole ID in crankshaft for a torque converter
Post by: dennisofaz on January 31, 2013, 04:35:16 PM

Thanks Tigger,

I called Esslinger and they said they bore a 0.75" hole for the pilot shaft on the 2.3 liter crankshaft.

Best regards,

Dennis

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: dennisofaz on January 30, 2013, 09:19:22 PM