Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: totljeep on January 14, 2013, 05:04:04 PM

Title: '77 2.8 V6 oil leak from filter adapter
Post by: totljeep on January 14, 2013, 05:04:04 PM
I called 3 parts stores and cannot find a gasket.. Anyone know where to find it??


Thanx,
David
Title: Re: '77 2.8 V6 oil leak from filter adapter
Post by: jeremysdad on January 14, 2013, 06:42:20 PM
You can always buy some gasket material (available in sheets at the major auto parts houses) and cut your own. Been there, done that,but not with the 2.8. The concept is the same, though. Hope that helps.
Title: Re: '77 2.8 V6 oil leak from filter adapter
Post by: Fred Morgan on January 14, 2013, 10:31:28 PM
Or you can do it by cross etching with sand paper and do a whole seal with orange hi temp silicone and let cure 24 hours and you are good to go !  Fred   :D
Title: Re: '77 2.8 V6 oil leak from filter adapter
Post by: flash041 on January 15, 2013, 08:24:10 AM
It takes a special o-ring, which I could not find either. I found the closest size o-ring and put it in. It leaked a bit so I took it apart again and coated the o-ring with heavy gasket sealant.Seems to be working ok now.
Text only | Text with Images