DOES ANYONE KNOW WHERE YOU CAN FIND A BRAND NEW ONE, DOES SPECTRA OR MODINE MAKE ONE?
ANY HELP WILL BE GREAT, MINE HAS JUST POP A HOLE IN THE TRANS COOLER, SO NOW I HAVE TRANS FLUID IN MY COOLANT!!
HAVE A MERRY CHRISTMAS!!!
Rock Auto
http://www.rockauto.com/catalog/x,carcode,1135178,parttype,2172 (http://www.rockauto.com/catalog/x,carcode,1135178,parttype,2172)
If you click the "More Info" link on that page, I think you can get dimensions of the product.
Also, Merry Christmas!
-Steve
of course it will be poo pooed but iv`e been running nothing but an add on trans cooler on my V6 pinto with turbo 350 for 7 years and not the first trans issue .. same with my 429 stang ...
THANKS THE ROCK SHOWS A LISTING SO I HOPE THEY HAVE IT IN STOCK, MERRY CHRISTMAS TO ME!!
Rockauto only lists what they have in stock not what they do not have.....Unlike some othe places and their shipping is very good....
Hoss, how did you adapt the T350 to the 2.8?
do you have air conditioning or not. I will be putting air conditioning I mind this year and have a radiator it's only 3 years old. I may be upgrading to a the higher capacity radiator for the air conditioning um I will let you know if mine is available
i have A/C so i need to see how thick mine is and compare to the rockauto's.
thanks
so the rockuto radiator is for a 2.3 only have on listed for a 2.8 but its the same part number as 2.3 which is wrong!!! so i iam still looking!!!
any info will help!!!
does anyone know if a 2,3 mustang ii radiator is the same or very close in size and will fit in a bobcat/pinto?
i have found a couple on ebay and dont want to buy if its going to take a lot of cutting and fab work to get it in at factory car with only 38,000 miles!
thanks for any input/.
This was my new 2.3 A/C radiator I put in my wagon. It had a driver side upper inlet that measures 1 1/2" & a passenger side lower return that I think is 1 1/4" if I remember right.
(http://i1023.photobucket.com/albums/af357/OrangeCrushMustang/1976%20Pinto/002.jpg)
nice looking radiator pinto5.0 , but ford in its better mind made the 2.3 and the 2.8 to have the hose outlet and inlets on the oppisite sides, if i needed a 2.3 can find them all day long for about 150.00, found a company that makes a rad for the 2.8 but its for the mustang ii, and the measurements online are about 5/8 taller then my bobcat, so not sure if it will fit.
thanks
Why not go to a rad shop & have them make one for you ?
Quote from: bbobcat75 on December 24, 2012, 09:29:28 AM
nice looking radiator pinto5.0 , but ford in its better mind made the 2.3 and the 2.8 to have the hose outlet and inlets on the oppisite sides, if i needed a 2.3 can find them all day long for about 150.00, found a company that makes a rad for the 2.8 but its for the mustang ii, and the measurements online are about 5/8 taller then my bobcat, so not sure if it will fit.
thanks
My bad, I misunderstood your question.