Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: James Meter on October 29, 2012, 07:50:57 PM

Title: Ford & Dodge Cragars....?
Post by: James Meter on October 29, 2012, 07:50:57 PM
I have these 2 five-lug Cragars off a '68 Valiant I used to have, and I wanna put em under my Pinto.
Could I keep it all-Ford and use a Ranger rear 8) ...or will I have to look into a Mopar rear?  :(

Thanks.
Title: Re: Ford & Dodge Cragars....?
Post by: 72pair on October 29, 2012, 08:16:10 PM
Pre-72 A-body mopars had that odd 5 on 4 inch bolt pattern that fits nothing else I know of.
Title: Re: Ford & Dodge Cragars....?
Post by: Pinto5.0 on October 29, 2012, 09:23:52 PM
Quote from: 72pair on October 29, 2012, 08:16:10 PM
Pre-72 A-body mopars had that odd 5 on 4 inch bolt pattern that fits nothing else I know of.

Exactly. You would need wheel adapters from 5 on 4 1/2" Ford to 5 on 4" Dodge.
Title: Re: Ford & Dodge Cragars....?
Post by: James Meter on October 30, 2012, 11:11:47 PM
Trading the read end from the Pinto's original to a 4 1/2" Ford (a 9" rear, I presume?) What would be the ideal vehicle to yank one out of? An early Mustang, Maverick..?
Title: Re: Ford & Dodge Cragars....?
Post by: Pinturbo75 on October 31, 2012, 10:05:27 PM
actually a rear out of an explorer is what youd want, get 2 short side axles and have the long side cut down to match the short side... its an 8.8 with 31 spline axles and a posi from a 4x4 that comes with either 373 or 410 gears
Title: Re: Ford & Dodge Cragars....?
Post by: mlbrowne71 on November 01, 2012, 08:23:17 AM
what years explorer? mlbrowne71.
Title: Re: Ford & Dodge Cragars....?
Post by: Pinturbo75 on November 01, 2012, 09:35:09 AM
any 4x4 before they went to irs...
Title: Re: Ford & Dodge Cragars....?
Post by: James Meter on November 01, 2012, 06:19:45 PM
Thanks!
Text only | Text with Images