Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Pup70 on October 15, 2012, 12:00:44 PM

Title: Trans model
Post by: Pup70 on October 15, 2012, 12:00:44 PM
What model automatic trans would be in a stock 1977 pinto cruiser wagon I need to know the model number

Thanx
Title: Re: Trans model
Post by: DBSS1234 on October 15, 2012, 02:28:01 PM
Which engine, 2.8 V-6 or 2.3 I-4? Manual or automatic?
Title: Re: Trans model
Post by: Mike Modified on October 15, 2012, 02:56:38 PM
Quote from: Pup70 on October 15, 2012, 12:00:44 PM
What model automatic trans would be in a stock 1977 pinto cruiser wagon I need to know the model number

Thanx

Yes, v-6 or 4-cylinder?   ;)

Mike
Title: Re: Trans model
Post by: DBSS1234 on October 15, 2012, 04:19:37 PM
Oops, read it too fast! ::)
Title: Re: Trans model
Post by: Fred Morgan on October 15, 2012, 08:34:53 PM
If you have a V-6 it is C-4. If you have a 2.3 it is a C-3.    Fred    :)
Title: Re: Trans model
Post by: bbobcat75 on October 15, 2012, 09:00:50 PM
not always fred! have a 75 with a v6 and has a factory C3!!
hope this helps!!
Title: Re: Trans model
Post by: Fred Morgan on October 15, 2012, 09:06:15 PM
Good to know Eric never heard of that, has got to be a rare.   Fred   :)
Title: Re: Trans model
Post by: Fred Morgan on October 15, 2012, 09:11:38 PM
But best way to tell if it is a C-3 it will have 13 pan bolts. If it is a C-4 it will have 11 pan bolts.   Fred   :)
Title: Re: Trans model
Post by: Pup70 on October 16, 2012, 09:05:29 AM
Thanks for the help guys
Text only | Text with Images