Pinto Car Club of America

http://www.thepartsbin.com/sitemap/hays~clutch_cable~parts.html

Scroll down to the bottom two.
Think it/they may work on a Pinto ?
Anyone try one ?

You can get from Auto Krafters new D5FZ-7K553A for $40.00 .   Fred   :)

http://www.autokrafters.com/v4/go.gnf

I got a link to the one you mention. That is the Pinto one.

The first one I posted is for a Mustang. Reason I was looking around for one is due to the small ball end on a Pinto cable, and big end on the clutch fork used for a V8.

I think it was Pinto5.0 that told me to weld a washer in place to make the fork end smaller.
But, a thicker cable with bigger ends would mean stronger.

Quote from: Reeves1 on September 01, 2012, 01:09:26 PM
http://www.thepartsbin.com/sitemap/hays~clutch_cable~parts.html (http://www.thepartsbin.com/sitemap/hays~clutch_cable~parts.html)

Scroll down to the bottom two.
Think it/they may work on a Pinto ?
Anyone try one ?

I don't think anyones tryed one yet. If I found one at a scrap yard I was gonna try one. But I got a feeling they wont fit without modification to the cable.Cause the cable is prolly gonna be too long on the pedal side since its designed to be used on a quadrant.Also if ya get the mustang firewall adjuster for those same mustang its billet and nice that could help with the cable length a little also.