Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Pinto5.0 on August 12, 2012, 09:05:40 PM
OK here goes nothing. I managed to acquire two D5 & two D9 bellhousings. Yeah, it was pricey but I needed 2 of them & it was a package deal.
I have one of the D9 forks & I know any 5.0 fork works so I'm good to go for the 2nd one. The problem is going to be the missing D5 forks. I know they are specific to these bells.
I also know the part number for them is D5ZA-7515-BA but what are they out of? Are those just standard Pinto/MII forks?
If I can get the right D5 forks I'll probably use those & sell the D9's off. I also have a spare bellcrank bell housing now that I wont need. I've still gotta pick up another T-5 but that's the easy part.
they are out of a 75 mII with the 2.3 liter 4 speed manual cars
Great, a 1 year part. That wont be too hard to locate at all......
Uuuuggghhhh!!!
Well....if anyone has one or two of them floating around message me please
I'll try and remember to look at the part numbers on my old bell (using a Quicktime RM-6063 now) and fork part number.
The only problem I see with the fork I have is the ball on the end of the cable is too small for the fork. Likely going to weld it & re-drill. Or make an adapter.
Fork I have is new.
The way everyone closes the hole is by banging a small hole washer with a ball peen hammer to cup it & weld it over the larger hole. I have to do that to my 5.0 fork when the time comes.