Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: grywht on July 28, 2012, 11:55:45 PM
All,
I'm interested in using a Pinto powerplant in my 1914 Model T pickup...I'm curious if someone can provide the physical dimensions of the various Pinto engines. I'm specifically interested in;
Length (from face of water pump pulley to bellhousing mounting surface)
Width (from outside of carb to exhaust manifold, width of cylinder head would also be a help)
Height (from oil pan/block mating surface to top of cam pulley) and (from oil pan/block mating surface to carb top)
1.6 (Kent), 2.0, and 2.3 information all welcome!
Thanks,
Gary W.
I have the 2.0 with a C4 in my 23 T. Apologise for not having the dimensions. It is a good fit power wise though.
Bellhousing to water pump pulley on the 2.3L is 24 inches. I just measured mine today to see if I had room for an electric fan.