Print Page - Pinto Caster/Camber tools

Title: Pinto Caster/Camber tools
Post by: Pangra74 on July 09, 2012, 02:55:46 PM

Does anybody have a set of Caster/Camber tools for the Pinto/MII? I've used pry bars in the past, but the little tools that fit in the frame that hold the control arms are really handy.

Joe

Title: Re: Pinto Caster/Camber tools
Post by: Srt on July 09, 2012, 07:10:48 PM

I may have some in the garage in the bottom of my old tool box.

I am out of town right now & won't be back until Wednesday AM.

I'll take a look & send a message one way or the other.

Title: Re: Pinto Caster/Camber tools
Post by: Pangra74 on July 09, 2012, 07:35:02 PM

That would be great. Let me know how much you want for them. I believe there are 4 of them, 2 per side, they have the little forks that grab the control arm, and the pin at the opposite end that goes in the hole in the frame.

Title: Re: Pinto Caster/Camber tools
Post by: arkyt on July 11, 2012, 08:38:51 PM

Seen 'em on ebay

Title: Re: Pinto Caster/Camber tools
Post by: Srt on July 11, 2012, 10:58:18 PM

Joe, took apart my tool box from top to bottom and can't find them at all.

I know exactly what you are looking for too.

Thought I might still have them but no luck!

Pinto Car Club of America

Shiny is Good! => General Pinto Talk => Topic started by: Pangra74 on July 09, 2012, 02:55:46 PM