Print Page

Title: Pcv
Post by: Stumblebuggy on June 25, 2012, 01:34:37 PM

Can someone tell me where the Pcv valve is on 80 Pinto and what it looks like, I have a 80 Shay with pinto 2.3 (http://i286.photobucket.com/albums/ll98/stumblebuugy/IMG_0048-1.jpg)

Title: Re: Pcv
Post by: racer99 on June 25, 2012, 02:28:55 PM

Look down below the carb and there is a black
cannister that mounts into the block.It is a vapor
seperator.

Follow the hose upward and you will find the PCV.

Title: Re: Pcv
Post by: Stumblebuggy on June 25, 2012, 07:36:30 PM

Thanks I found it' Not a lot of room under the hood of the shay

Title: Re: Pcv
Post by: Stumblebuggy on February 17, 2016, 08:13:09 AM

I need a pinto or mustang ll rear clip

Sent from my SM-G900V using Tapatalk

Title: Re: Pcv
Post by: Stumblebuggy on February 17, 2016, 08:18:40 AM

Quote from: Stumblebuggy on February 17, 2016, 08:13:09 AM
I need a pinto or mustang ll rear clip

Sent from my SM-G900V using Tapatalk

With roof

Sent from my SM-G900V using Tapatalk

Title: Re: Pcv
Post by: 76hotrodpinto on February 17, 2016, 10:57:41 AM

I've run across a few m2 carcasses in the Portland Oregon area. If you are interested, I can go get some pics and prices for you. They tend to run in the $300 range around here.

Title: Re: Pcv
Post by: Stumblebuggy on February 17, 2016, 11:28:58 AM

I'm on the east coast, long way:)

Sent from my SM-G900V using Tapatalk

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: Stumblebuggy on June 25, 2012, 01:34:37 PM