Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: 78_starsky on May 26, 2012, 02:36:08 AM

Title: help with MSD 6AL into 2.8 please
Post by: 78_starsky on May 26, 2012, 02:36:08 AM
Hey all,  I am needing a bit of help with setting up a MSD 6AL ignition into 78 with 2.8.  i have read the manual a few times and here is where I am stuck

http://www.msdignition.com/uploadedFiles/MSDIgnitioncom/Products/Ignitions/6420_instructions.pdf

scroll down to pages 17/18 and which one do i use?  and is this silver box in pic what i splice into? 

thanks in advance


Title: Re: help with MSD 6AL into 2.8 please
Post by: Reeves1 on May 26, 2012, 03:56:10 AM
I use their site for questions: http://www.msdignition.com/forum/
Title: Re: help with MSD 6AL into 2.8 please
Post by: Pinto5.0 on May 26, 2012, 10:57:57 AM
The silver box is the voltage regulator for the alternator. You shouldnt have to splice that with anything.
Title: Re: help with MSD 6AL into 2.8 please
Post by: 78_starsky on May 26, 2012, 12:14:59 PM
"The silver box is the voltage regulator for the alternator. You shouldnt have to splice that with anything."


thanks pinto5    that makes sense ....

thanks reeves,  i didn't know there was a forum there.  If anyone else has done this please chime in it will save re-entering a new forum... lol

cheers
Text only | Text with Images