Pinto Car Club of America
Shiny is Good! => Your Project => Topic started by: awrid123 on May 11, 2012, 10:49:46 AM
I have the 78 Pinto with the 2.3 motor and trannie removed. I have a 66 289 (getting rebuilt) with a 4 speed T10 from a 66 Mustang.
I need help getting the motor and transmission installed in the car. I am not sure where to start to look for motor mounts etc. I am at a loss.
I purchased a manual from ebay which really didn't tell me anything I don't already know.
I need pictures showing placement, motor mounts etc.
Any help and direction would be greatly appreciated. My son has a 78 also and has a 302 to put in his car.
Thanks
Wayne - Chesapeake VA
awrid123@aol.com
Here is a 78 swap: http://www.fordpinto.com/your-project/78-302-swap-in-progress/
Here is 6 pages of info: http://www.fordpinto.com/your-project/302-motor-mounting/
Lots of other info on ths topic here. Just read through this section & use the search & you will find so much info it will make you cross eyed ! ;D
If you still have questions, ask away ! Great bunch of folks on this site !