Print Page - Need info for AOD swap

Title: Need info for AOD swap
Post by: randyg on March 22, 2012, 07:38:48 PM

Hey all,
Bit the bullet and bought a 331 kit to put in my V8 Pinto. I will be going from a toploader to an AOD auto. Anybody have any info or sources? The block is a roller cammed, aluminum headed, street motor of about 10:1 compression. I want to AOD to make it more streetable with the 5.43 in the rear!
Thanks
Randy

Title: Re: Need info for AOD swap
Post by: beaner on March 22, 2012, 10:10:45 PM

this place will work for you

http://www.lentechautomatics.com/aodhome.html (http://www.lentechautomatics.com/aodhome.html)

brad :)

Title: Re: Need info for AOD swap
Post by: fast64ranchero on March 23, 2012, 11:19:54 AM

I don't know what year your putting the 331 in, If it's a pre 74 then you'll need to "work" the firewall and trans tunnel to fit it.

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: randyg on March 22, 2012, 07:38:48 PM