Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: rick67 on October 24, 2011, 09:08:20 PM

Title: 79 pinto wagon starter removal UGH!!!! Help!
Post by: rick67 on October 24, 2011, 09:08:20 PM
  Can anyone please help me with pics or a how to?  Just got a 79 pinto wagon barn find with 39000 miles and a 2.8 automatic.  The starter needs replaced, and I can't seem to find a way to get it out now that the bolts are removed?  Do I need to lift the entire engine?  Any help GREATLY appreciated... Everything in car is bone stock.

Thanx,
Rick
Title: Re: 79 pinto wagon starter removal UGH!!!! Help!
Post by: flash041 on October 24, 2011, 09:24:42 PM
You need to unbolt the steering rack and pull it out of the way.
Title: Re: 79 pinto wagon starter removal UGH!!!! Help!
Post by: rick67 on October 24, 2011, 09:40:51 PM
THANK YOU!!!!!
Title: Re: 79 pinto wagon starter removal UGH!!!! Help!
Post by: flash041 on October 24, 2011, 09:49:44 PM
no need to disconnect the powersteering line or tie rods. Those can stay connected and rack can just swing forward and down.
Title: Re: 79 pinto wagon starter removal UGH!!!! Help!
Post by: JohnW on October 26, 2011, 10:18:45 AM
Yep, just pull those 2 bolts.  I tried doing my starter in a driveway - wasn't going to happen.  Once the rack is out, you can use a long extension and have perfect access to all 3 bolts and the starter will come out straight towards the front.
Title: Re: 79 pinto wagon starter removal UGH!!!! Help!
Post by: 78txpony on October 26, 2011, 01:54:15 PM
Use a good impact wrench on theose rack bolts - they are held on with like 100ft/lbs of torque + rust...
Title: Re: 79 pinto wagon starter removal UGH!!!! Help!
Post by: JohnW on October 26, 2011, 03:19:43 PM
Spray them with some PB Blaster first and let it soak.  I'm pretty sure I used a pipe on a 3/4" drive ratchet to get mine off.
Text only | Text with Images