Pinto Car Club of America
Shiny is Good! => General Pinto Talk => Topic started by: lefty on October 23, 2011, 12:09:43 AM
on the c3 which transmission line is the flow back from the radiator and where does it go on the transmission itself?? there are 2 places where the lines screw into the transmission ... thanks in advance...
Lefty
Return line should be on the passenger side and pressure should be on the driver side.
return line which inlet on the transmission mission does it screw into there are two inlets on the transmission -
thanks..
these two inlets on the """"transmission""" are both on passenger side of transmission I need to know which handles pressure and which handles return...
I don't have any lines to go by I am making them from scratch....
Heading back to work in a few, but I will check my trans shop manual later and find it for you.
I could be wrong but I believe the one towards the front of the transmission is the pressure side...If I'm wrong it will be good to know since i have to plumb a cooler into my wagon at some point in time. The transmission out of my drag car had a hard line going from one fitting directly to the other. Now that it will be street driven I'll need a cooler.