Print Page - Brake rotor and caliper upgrades

Title: Brake rotor and caliper upgrades
Post by: Bobcat Racer on October 12, 2011, 03:20:30 PM

Are there any brake upgrades to the rotors and calipers that will retain the 4 bolt hubs and doesn't cost Wilwood money? I know there are a bunch of aftermarket kits to go to 5 bolt but I really don't want to go that route. Has anyone every tried to adapt a Fox Body Mustang or T-Bird TC to a Pinto setup?

Sorry if this has been discussed at length in the past but I searched the forums and didn't find what I was looking for.

Thanks

Title: Re: Brake rotor and caliper upgrades
Post by: Pinto5.0 on October 12, 2011, 05:01:29 PM

There were 4 lug Granada rotors made.

Title: Re: Brake rotor and caliper upgrades
Post by: Srt on October 12, 2011, 06:12:17 PM

i know the 78-80 ford fairmont had front discs & a 4 lug pattern the same as the Pinto

Pinto Car Club of America

Shiny is Good! => Your Project => Topic started by: Bobcat Racer on October 12, 2011, 03:20:30 PM