Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: JoeBob on September 22, 2011, 09:47:49 PM
I looked at a how to film on the net. It showed stabilizing the door, driving out the pins and bushings. Drive in the new ones. This was not on a pinto. It seems it would be basically the same on any older car. Would it be easier if I unbolted the door from the hinge first? After the work is done reattach the door.
Bill
thats how I did it,unbolt the door, piece or cake!