Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => Parts Resources, Here is where you can find this or that. => Topic started by: bbobcat75 on August 24, 2011, 08:38:45 PM

Title: ford pinto wagon rear door gasket
Post by: bbobcat75 on August 24, 2011, 08:38:45 PM
has anyone found a gasket at a u pull it that will work/fit to replace the gasket other then buying a brand new one from steele rubber??
any help thanks
eric

on my hatch u got a ford focus door gasket that fit awsome in the hatch gasket!!any help will be greatful!!
thanks again
Title: Re: ford pinto wagon rear door gasket
Post by: phils toys on August 24, 2011, 11:31:40 PM
if my memory servers me right  the door gasket from a ranger works
Title: Re: ford pinto wagon rear door gasket
Post by: dave1987 on August 25, 2011, 12:52:51 AM
I pulled one from an early 80s 2 door escort. Fits perfectly without any trimming!

I pulled a couple extra to have as spares as well, since they are about $2.00 a pop here.
Title: Re: ford pinto wagon rear door gasket
Post by: bbobcat75 on August 25, 2011, 12:23:36 PM
what year ranger!!
Title: Re: ford pinto wagon rear door gasket
Post by: JonzWagon on August 25, 2011, 02:40:51 PM
Use one from a 1998 or newer. It works great, about 4" too long so one cut will do it.
Title: Re: ford pinto wagon rear door gasket
Post by: bbobcat75 on August 28, 2011, 11:35:43 AM
got one from a 99 regular cab ranger and it was 4inches too short, so got one from an extra cab ranger 98 and was 8inchs too long, was able to cut it to fit.  hope this helps anyoen else out there
thanks

eric
Text only | Text with Images