Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: stinsonj on May 23, 2011, 08:27:32 AM
Does anyone know what parts (only the ones that attacth to the engine directly) are needed to convert a 1975 2.3L pinto to power steering (brackets, pulleys, etc.)? Also, are there any other vehicles (ranger, mustang, etc.) that may be compatible?
the pump is 76 and older the pully is a dule belt at least on mine but it also has ac the bracket is under the altenator then 2 hoses that go to the rack.
i just bought a new pump from autozone as the seals went in mine last fall price was about $35 that did not includ the resavore