Text only | Text with Images

Pinto Car Club of America

Shiny is Good! => Your Pintos/Bobcats & Racers => Topic started by: Bwayrshires on April 12, 2005, 08:18:58 PM

Title: Transmission Mount
Post by: Bwayrshires on April 12, 2005, 08:18:58 PM
I have a 74 wagon drag car with a 302 that I am re-installing the c-4 trans. I have solid engine mounts, what are you guy's using for trans mounts. I found a Lakewood mount in Jegs, but it is $45. Thank's,Brian.
Title: Re: Transmission Mount
Post by: turbopinto72 on April 13, 2005, 10:08:12 AM
Can you modify the stock mount and replace the rubber with poly or a chunk of aluminum???
Title: Re: Transmission Mount
Post by: Bwayrshires on April 13, 2005, 06:13:04 PM
I don't have the stock mount, it had a 4 speed that I took out. I have heard that you can't use a solid trans mount with solid engine mounts, need to have some flex in the driveline, so I'm told. I work at a Ford dealer and the stock mount looked a little flimsy by the picture and I don't think it's available. Just curious what you guy's are using.

Thank's, Brian.
Title: Re: Transmission Mount
Post by: 78pinto on April 13, 2005, 10:26:33 PM
my mount is an Energy Suspension for a C4 , works great!
Title: Re: Transmission Mount
Post by: Bwayrshires on April 14, 2005, 05:23:12 PM
Thank's, do you happen to know the part number.

Thasnk's again, Brian.
Title: Re: Transmission Mount
Post by: 78pinto on April 14, 2005, 06:50:39 PM
any performance place will be able to hook you up with one, i don't have the part number. They only make one mount for all C4's
Text only | Text with Images