Pinto Car Club of America
Shiny is Good! => General Pinto Talk => Topic started by: flash041 on March 23, 2011, 08:25:33 PM
I put oild in my engine and test ran the oil pump with a drill and found a leak in the oil filter adapter. It was coming out between the bolt and casting just under the flanged head. I assume there must be a gasket I missing, but I cant find a listing for one. Does any one know if its a fiberwasher , steel washer , or o-ring? I did get a new o-ring for between the casting and engine block.
Today i got a fiber washer and installed it.Five minutes later I found the Original Copper washer on the garage floor!! So for the record it uses a copper washer.