Pinto Car Club of America
Shiny is Good! => General Pinto Talk => Topic started by: flash041 on November 03, 2010, 05:08:20 PM
Does any one know a source for a pressure power steering hose for a 78 V6 ?
I just did some quick checking on line an found a listing on the Napa web site. I called the store and they showed TWO in stock in the ENTIRE counrty! One in Milwaukee and the other in Salt Lake. I am getting the one from Milwaukee so there should be one left in Salt lake if any one needs one.
Dave you missed the Pinto parts depot. Fred ;D
can do a 2 day ship for a total of $28.00
that hose may differ depending on the rack you have. the trw rack uses a different fitting than the fomoco rack. one uses an oring style fitting the other is inverted flare at the rack end. you can tell the racks apart as one has 3 bolts on the input shaft
make sure your not waiting on the wrong hose.
OhSix'
the pic on the website looked like the right hose,, ill find out tomorrow.
Got the hose .. and its was the right one! It has o-ring seals. I put it and and no leaks!