Pinto Car Club of America
Shiny is Good! => Your Project => Topic started by: cossiepinto on October 17, 2010, 12:38:01 PM
I made a little more progress last weekend.
The pedal brackets are now in. They hold the overhung pedal assembly. The three master cylinders that go in here are for the brakes (front and rear) and clutch.
You can see the terminal block for wiring the car (I dread this part).
The aluminum plate around the shifter hole covers the elongated hole I made when I was going to use a T-5. Now I'm back to a Quaife 4-speed.
Paul/Cossiepinto
Sorry, the other pics didn't post. Here they are.