Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: case_26 on March 13, 2005, 10:34:49 PM
okay ive got a 75 pinto, and i 78 LTD which i plan on tearing apart in order to mak emy pinto awsome, ive got a mustang 9 inch and was wondering if i could take the 5 lug spindles off the LTD and put them on the from of the pinto. would it work?
There are kits out there for a 5 lug convert. The granada rotor/bearings will fit your pinto spindles. The wheels will be put outboard about 5/16" on either side, removing of the splash sield, and some cutting of the lower control arms will be needed. I pruchased the kit from rjays.com for about 240 shipped. Had to buy the hoses/b-bolts local, I used 1988 chevy s10 blazer 4x4 2.8v6 front hoses, and tweeked the ends.
Bill