Text only | Text with Images

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: ddewey78 on September 24, 2010, 12:27:18 PM

Title: 2.0 bellhousing bolts
Post by: ddewey78 on September 24, 2010, 12:27:18 PM
I am going to pick up a motor and I want to put it on an engine stand to haul it home. Can anyone tell me what size the bell housing bolts are?
Title: Re: 2.0 bellhousing bolts
Post by: 72pair on September 24, 2010, 04:04:40 PM
I'm pretty sure they're M10. I usually use 3/8 bolts with nuts and washers thru the 2 unthreaded lower holes. JT
Text only | Text with Images