Pinto Car Club of America

i have a maverick rear end. i have heard that this is a direct bolt on. is that true?

 I have a 8" Maverick in my '76 SW & in my case it was a direct bolt in with no mods needed.

There are some differences that could be minor in your case.  From the link below, the Maverick bolt pattern is 4 on a 4-1/2" circle (I thought 5 on 4-1/2" was available also but it is not shown) while the Pinto has 4 on a 4-1/4" circle (redrill or replace axles to get desired bolt pattern).  From reading here on the forum, I believe the spring purch may need some modification too.
http://www.teufert.net/wheels/bolt-pat.htm (http://www.teufert.net/wheels/bolt-pat.htm)

 I apologize, I didn't realize he was looking for a four lug pattern.
The one I used is a standard Ford 8" with a removeable carrier assy.
with a 5 on 4 1/2 pattern.

my maverick is a 5 bolt as well
phil

mine is a 5 lug too. i found some 13" 5 lug rims so i can still use my hubcaps