Pinto Car Club of America
Shiny is Good! => Your Project => Topic started by: shotgun63 on August 26, 2010, 03:37:14 PM
I bent my out put shaft on my tranny got a parts trans with a good 1 im just not sure how to take it out of the parts one and put in my good 1 if anyone can help me with this please let me know any info would be greatly appreciated
Patience!!!
I had the German 4 speed in my old '71 apart at least a dozen times but it was so long ago.
An output shaft replacement requires a complete disassembly of the trans. If you can find a Ford Factory Manual or an old MOTOR MANUAL you will be OK if you TAKE YOUR TIME.
I don't know where you live but a good resource sometimes is the local public library for reference/repair manuals