Print Page - clutch cable question

Title: clutch cable question
Post by: Bigtimmay on July 15, 2010, 01:15:49 PM

Ive heard alot of people talk about the original clutch cables in pinto getting pulled through the friewall and people switching to a MII cable adjuster or watever but has anyone used sumthing like this 79-04 mustang firewall cable adjuster to fix the pull through problem?
http://www.latemodelrestoration.com/item/LRS-7553H/79-04-Ford-Mustang-Firewall-Adjuster-With-Jam-Nut (http://www.latemodelrestoration.com/item/LRS-7553H/79-04-Ford-Mustang-Firewall-Adjuster-With-Jam-Nut)

Title: Re: clutch cable question
Post by: ToniJ1960 on July 15, 2010, 10:25:55 PM

I sure do want to know as well :)

Title: Re: clutch cable question
Post by: dave1987 on July 16, 2010, 12:12:07 AM

Would sure be a lot less work than using a mustang II tube which requires enlarging to cable hole.

Title: Re: clutch cable question
Post by: Srt on July 17, 2010, 04:08:18 AM

pretty slick piece

Pinto Car Club of America

Shiny is Good! => General Pinto Talk => Topic started by: Bigtimmay on July 15, 2010, 01:15:49 PM