Print Page - WANTED- 2.3 T5 clutch fork(release arm)

Title: WANTED- 2.3 T5 clutch fork(release arm)
Post by: crossy on July 09, 2010, 09:15:58 AM

OK, the classifieds say to post want ads here in the forum so if I'm wrong please move it. I am FINALLY ready to do this T5 conversion and noticed that the clip that holds the release bearing in place is about to fall apart on the fork i have. I have not called ford yet, but i will. just thought I would throw it out here first. I would even take just a good clip off another ford clutch arm and re-attach it. Anyway the whole arm has engineering number E6ZR-7515-BA . it came from a 91 2.3 Mustang as near as i remember. lemmeknow. thanx , crossy

dbcrossy@verizon.net

Title: Re: WANTED- 2.3 T5 clutch fork(release arm)
Post by: crossy on July 21, 2010, 06:27:01 AM

C'mon somebody gotta have a simple release arm laying or havea friend that parts out Mustangs. It's the only thing holding me up now.

E6ZR-7515-BA . it came from a 91 2.3 Mustang

Pinto Car Club of America

Shiny is Good! => General Pinto Talk => Topic started by: crossy on July 09, 2010, 09:15:58 AM