Print Page - springs for v-8 cars

Title: springs for v-8 cars
Post by: martelle on June 11, 2010, 07:23:25 PM

Any ideas on what is available for heavier front coils to suit a v-8 car?

Title: Re: springs for v-8 cars
Post by: Bigtimmay on June 11, 2010, 07:35:31 PM

factory v6 coils should be just fine.

Title: Re: springs for v-8 cars
Post by: apintonut on June 11, 2010, 09:22:24 PM

http://www.speedwaymotors.com/Mustang-II-Pinto-Stock-Diameter-Springs,32896.html?parentDisplayId=7771 (http://www.speedwaymotors.com/Mustang-II-Pinto-Stock-Diameter-Springs,32896.html?parentDisplayId=7771)

Title: Re: springs for v-8 cars
Post by: dick1172762 on June 11, 2010, 10:02:01 PM

Their on e-bay every day . Look at Mustang II

Title: Re: springs for v-8 cars
Post by: Pinto5.0 on June 12, 2010, 04:04:18 PM

Im gonna run used V6 springs. Im hoping to end up an inch lower than stock. Maybe a little more....

Title: Re: springs for v-8 cars
Post by: 71pintoracer on June 12, 2010, 07:54:53 PM

I used v6 springs and still had to cut 3/4 of a coil off, my car is lowered 2"

Pinto Car Club of America

Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: martelle on June 11, 2010, 07:23:25 PM