Pinto Car Club of America
Welcome to FordPinto.com, The home of the PCCA => General Help- Ask the Experts... => Topic started by: 78txpony on May 11, 2010, 09:07:11 PM
Okay, so i am reaching the end of Old Faithful's top-end work and am ready to install a new set of genuine Motorcraft plug wires that I got from Rockauto.
It included two wires of equal length and two more wires of equal length that are about 3" longer than the other two.
I am guessing #1 and #2 get the longer ones but they seem too long...
Included is a picture of what I have so far, minus two of the clips.
Am I right or wrong?
Anyone have a picture of the correct routing? I could probably figure it out from there.
Many thanks!