Print Page - What do I need for headlight assembly (Picture)

Title: What do I need for headlight assembly (Picture)
Post by: KTaylo5 on April 22, 2010, 05:39:33 PM

I am going to put headlight back in my Pinto drag car for aesthetic purposes. What do I need to make this happen? The car has been gutted and all there is now is a piece of thin sheet metal to cover the holes as you see in the picture.

(http://i625.photobucket.com/albums/tt338/KTaylor5_2009/02-13-2010122416AM.jpg)

********************************************

1969 Cougar Eliminator: 427 side oiler
1971 Pinto Drag Car(10.91): 427 side oiler
1966 Fairlane GT/A: 390 HI-PO
1965 Mustang Fastback: 289 HI-PO
1961 Starliner: 390 HI-PO
1936 Ford Coupe: Flathead
1936 Ford Club Cabriolet: Flathead
1955 Ford Thunderbird
2004 Cobra: Screaming Yellow

http://s625.photobucket.com/albums/tt338/KTaylor5_2009 (http://s625.photobucket.com/albums/tt338/KTaylor5_2009)>/

Title: Re: What do I need for headlight assembly (Picture)
Post by: Fred Morgan on April 22, 2010, 07:07:18 PM

Kyle head light bucket and lamp retaining ring, to finnish off head light bezel. Fred :)

Title: Re: What do I need for headlight assembly (Picture)
Post by: KTaylo5 on April 22, 2010, 11:33:31 PM

Thanks for the quick reply! Where is the best place to find those pieces at, and will 72 and 73 parts fit my car?

Title: Re: What do I need for headlight assembly (Picture)
Post by: Fred Morgan on April 23, 2010, 10:25:45 AM

72 - 73 are ok. Best place to find is me. Fred :)

Pinto Car Club of America

Shiny is Good! => General Pinto Talk => Topic started by: KTaylo5 on April 22, 2010, 05:39:33 PM