Pinto Car Club of America
Shiny is Good! => Your Project => Topic started by: GERBEAR on January 24, 2005, 08:52:09 AM
I have a 1977 pinto wagen with a v6 on the power brakes there is a rubber hose where does it goes!!!
it goes to a source of vacume, usually a vacume tree on the firewall.
if I remember right, there's a port on the back of the carburetor mounting plate. It's been a while since I've had to work on my bobcat.
Definitly on the small vacuum tree on the back side of the carb.