I have a Offenhauser intake & the carb was mounted sideways , will it work mounted the other way ?
I assume you are talking about a 4bbl? I am sure it would but I think it really depends on your linkage setup? I have a Wiend 2.0L 4bbl manifold that has the carb mounted differently than others that I have seen but it works just fine because the linkage that came with the manifold was setup specially for the Pinto. Just bolt in and go.
If its the offy dual-port intake the carb is sideways because that is how the primary and secondary runners line up.
The problem I have with carb sideways is the cable , I will need a longer one , any ideas on were to get one ?
I have for $20.00 + ship. Fred :)
Send me a email , Brian89stang@gmail.com . I have a 73 pinto , will your cable work ? I can do paypal if that works with you
Give me a ship zip for total. Also to be right let me know length from firewall to carb attach. Fred :)
Zip 47150 , give me a day or so for the 2 figure out how long ,
Shipping 2 day to New Albany is $5.35. Fred
The one I have is 15 inchs from firewall to the part that snaps on the carb , I think I need 25 inchs to work
I have 24". Fred :)
I'm sure that would work
I will take that cable , how would you like me to pay ?
PM sent. Fred :)
Sent 26 dollars via paypal
I will ship Monday AM. Fred :)